EV Microphone Accessories - Cables, Clips & Others
Dual RackMount Kit - (for two receivers) works with RE-2, FMR-500, SAFE-1000 and other older 1/2 rack receivers. Includes all screws and hardware required. i. Mounts two RE-2 receivers side by side in one 19" rack space.
Includes knock out for FMCK front mount antenna cables.
Includes, srews, hardware and instructions for installations.
Powder coated stell construction.
RM-S (Single RackMount Kit)
Single RackMount Kit - works with RE-2, FMR-500, SAFE-1000 and other older 1/2 rack receivers. Includes all screws and hardware required.
i. Mounts one RE-2 receiver in one 19" rack space.
ii. Include knockouts for front mount antenna cables.
(RMS-TNC includes cables)
iii. Includes screws, hardware and instructions for installation.
iv. Powder coated steel construction.
FMCK (Front Mount Antenna Kit)
The FMCK includes 4 front mount antenna cables with female TNC connectors on one end and a bulkhead male TNC on the other end. The male connectors mount in the provided knockouts in the RM-S and RM-D rack mount kits. The four cables included are enought for two receivers.
Mounts two RE-2 receivers side by side in one 19" rack space.
RM - D (Dual RackMount Kit)
Female TNC end connects to any EV / Telex receiver.
Male TNC connector mounts in the rack mount knockouts.
Four cables included in each kit, enough for two receivers.
RSB-2 (Referee Mute Switch)
The RSB-2 toggle mute switch is the football standard for referee wireless systems. The RSB-2 plugs in between the lavalier or headworn microphone and the bodypack transmitter to provide a noiseless mute. The REV-WT and WTU-2 bodypacks automatically recognize the RSB-2 but older transmitters requie a special referee version.
i. TA4 in and out connectors for any EV / Telex lavalier mic i. i.
and bodypack transmitter.
ii. The belt clip can be flipped for right or left side wearing.
iii. Positive toggle switch is large and easy to use without looking.
iv. Noiseless mute, no clicks or pops.
WP-WT (Leather Pouch for REV-WT)
The WP-WT is a leather pouch for REV-WT and WTU-2 bodypack transmitter. A clear window in the front allows the LCD Screen to show through and the snapping top strap to secure the bodypack. An integrated leather coveres metal belt clip on the back of the WP-WT secures the unit to a belt, costume, or guitar strap.
Elastic top band for a snug, secure fit.
Clear window over LCD Screen.
Top strap snaps to secure bodypack.
Leather covered integrated belt clip for belt, costume or guitar strap mounting.
MAC-2 (XLR to TA4 Adapter Cord)
The MAC-2 cord allows any dynamic handheld microphone be use with any EV / Telex wireless bodypack transmitter.
i. TA4 Connector for any EV or Telex Bodypack.
ii. 4 ft cord to XLR.
iii. Works with dynamic microphones only.
MAC-G2 (George L Guitar Cable)
No-solder George L(TM) Guitar cable for the REV-WT, WTU-2, CSB-1000, WT-1000, and REV-BP. The MAC-G2 includes a straight in and right angle 1/4 inch connector so you can use whichever is best for your guitar.
George L No-Solder, low noise cable and connectors for great sound an easy repairs.
Includes right angle and straight in 1/4 inch connector.
TA4 connector for any EV / Telex Bodypack transmitter.
MAC-G3 (RE-2 Guitar Cord featuring George L's Cable)
The MAC-G3 uses low noise George L Guitar cord for the BPU-2 and WT-500 bodypack transmitters. Using the MAC-G3 with the EV RE-2 exclusive Guitar Optimization gives you one of the most "wired" sounding wireless rigs of all time.
i. George L low noise cable for great sound.
ii. Built in signal pad to work with BPU-2 / WT-500 bodypack
iii. TA4 Connector for any EV or Telex Bodypack Transmitter.
WP-1000 (Leather Pouch for BPU-2)
The WP-1000 is a leather pouch for CSB-1000, BPU-2, WT-500, WT-1000, and REV-BP Bodypack Transmitter. A clear window in the front aloows the LCD screen to show through and the snapping top strap covers and protects the on/off button. An integrated leather covered metal beltclip on the back of the WP-1000 secures the unit to a belt, costume, or guitar strap.
Fits BPU-2, WT-500, REV-BP, CSB-1000 and WT-1000 Bodypacks.
Elastic sides for a snug, secure fit.
Clear window over LCD Screen.
Top strap snaps to secure bodypack and it covers the on/off switch.
Leather covered integrated beltclip for belt, costume or guitar strap mounting.
BC-1000 (Beltclip w/ Tab & Screw)
the BC-1000 is a cell phone style swiveling beltclip with tab and screw for the REV-WT, WTU-2, CSB-1000, WT-1000, or the REV-BP Transmitter. The mounting tab also allows these transmitters to work with the PC and Boundary Satellite wireless accessory microphones.
BP-2-Clip-Swivel (Beltclip w/ Tab & Screw)
The BP-2-Clip-Swivel is a cell phone style swiveling beltclip with tab and screw for the BPU-2, and the WTU-500 Transmitter. The mounting tab also allows these transmitters to work with the PC and Boundary Satellite Wireless accessory microphones.
BP-2-Clip (Flat Beltclip for BPU-2)
The BP-2-Clip is a flat beltclip for the BPU-2, and the WT-500 transmitter. The BP-2 Clip offers an alternative mounting style to the standard swivel clip.
MSSA (Custom Standard Adapter)
the MSSA is a custom fit stand adapter for the RE-2, FMR-500, PHTU-2 and REV-PH HandHeld Transmitters.
MSA-REV (Custom Stand Adapter)
The MSA-REV is a custom fit stand adapter for the RE-H HandHeld Transmitters.
HHCK (HandHeld Color Kit)
The HHCK includes 6 different color caps for he HTU-2, HT-500, PHTU-2 and REV-PH HandHeld Transmitters. The color caps help the sound engineering identify which channel is in use from a distance.
Dynacord Vertical Array Systems LaunchDynacord will have a new speaker added to its existing line. Designed to impress and tantalize the senses. Sleek, versatile and ...
Dynacord / Electro-Voice Products Live Experience,28 July,2011SOUNDLINE is organizing a one-day special, Dynacord (DC) and Electro-Voice (EV) products Live Experience, conducted outdoor at Dataran Peta...
Dynacord on Major DisplayDon't forget to check our website for the latest updates and the full setup of the Dynacord system which is on display..........